Car Showroom Prefabricated Steel Building Glass Curtain Wall 24m Clear Span Display
Product Summary
A car showroom has two buildings inside one envelope. The display hall needs a fully glazed facade, a 24 m clear span and a floor that reflects light; the workshop behind it needs a sealed roof, a lift bay and oil resistant flooring. This building separates the two structurally: a glazed portal ...
Product Custom Attributes
car showroom steel building
,glass facade steel structure
,showroom clear span building
Basic Properties
Trading Properties
Product Description
A car showroom has two buildings inside one envelope. The display hall needs a fully glazed facade, a 24 m clear span and a floor that reflects light; the workshop behind it needs a sealed roof, a lift bay and oil resistant flooring. This building separates the two structurally: a glazed portal frame over the display area and a heavier bay frame over the workshop, linked by a shared column line so the facade reads as one volume. KXD Steel Structure details showrooms around the dealer brand standard, because the glazing module and the ceiling height are usually fixed by the manufacturer before the structure is designed.
The glazed facade is the structural challenge. A 24 m span glass wall needs a secondary steel grid at 1.5 m centres to receive the mullions, and the frame behind it must deflect less than 15 mm under wind load or the glazing joints will open. We design the display frame for a tighter deflection limit than a normal industrial building, and we coordinate the mullion positions with the brand standard so no column lands behind a vehicle display position. Where the client wants a mezzanine for offices above the showroom, the mezzanine is framed independently so its live load does not add deflection to the glazed elevation.
The workshop side has different priorities. A 6 m clear height allows a two post lift and a vehicle on top, the roof is a sealed insulated panel with no rooflights over the work bays to avoid glare on paint inspection, and the floor is a hardened, oil resistant slab with falls to a separator. The two areas are separated by a fire rated wall with roller shutter doors, and the roof structure above the workshop is designed for a 0.5 kN per square metre allowance for future exhaust extraction and compressed air lines rather than adding them later.
Key Features- 24 m clear span display hall: Column free vehicle display with mullion positions set to the brand standard
- Tight facade deflection limit: Frame designed under 15 mm movement so glazing joints stay sealed
- Secondary facade grid: Steel at 1.5 m centres to receive curtain wall mullions
- Independent mezzanine: Office mezzanine framed separately to protect glazed elevation tolerances
- Workshop bay frame: 6 m clear height for two post lifts with sealed insulated roof
- Service allowance: 0.5 kN per square metre for future extraction and air lines
| Parameter | Specification |
|---|---|
| Display clear span | 24 m, glazed facade with 15 mm deflection limit |
| Workshop height | 6 m clear with lift bay |
| Facade | Curtain wall on secondary steel at 1.5 m centres |
| Roof | Insulated panel, no rooflights over work bays |
| Floor | Hardened oil resistant slab with falls to separator |
| Separation | 120 minute wall with roller shutter doors |
| Mezzanine | Independent frame, 3.5 kN per square metre office load |
| Structure | Q355B portal frames, galvanized secondary steel |
| Service allowance | 0.5 kN per square metre in workshop roof zones |
Vehicle dealerships, agricultural and construction equipment showrooms, boat and caravan display halls, furniture and home improvement retail warehouses and any building where a glazed frontage meets a service workshop use this configuration. It also suits industrial clients who want a customer facing entrance with a working production area behind one facade. Where a brand standard requires a specific ceiling grid or lighting layout, we set the roof structure to suit it rather than adapting the standard afterwards.
Engineering Notes and Quality ControlShowrooms are inspected for the finish as much as the structure. Facade deflection is measured under a design wind load or verified by calculation against the glazing supplier's limit, and mullion positions are surveyed against the brand drawing before the glass is ordered. Slab flatness and finish are checked under raking light because a showroom floor shows every undulation. Roof waterproofing over the workshop is flood tested before handover, and the fire separation wall is inspected for continuity at the roof junction.
Packaging, Loading and WarrantyDisplay frame members ship with coating protection at slings points, facade secondary steel is bundled by elevation and workshop frames separately. Materials are labelled by zone so the glazed area is not confused with the workshop during erection. Documentation includes the facade deflection calculation, mullion setting out and the service allowance drawing. Structural warranty is 10 years, finish warranty 15 years. Send your brand facade standard, display capacity and workshop equipment list for a layout and frame study.
Contact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.