Heavy Snow Climate Prefabricated Steel Building 2.0 kN Per Square Meter Roof Load Capacity
Product Summary
Snow load is not a single number. It depends on the roof pitch, the exposure, whether snow can slide off, and whether drift will pile against a parapet or a change in height. This cold climate building is designed for a 2.0 kN per square metre ground snow load converted to roof load with the drift ...
Product Custom Attributes
heavy snow steel building
,cold climate steel structure
,snow load building
Basic Properties
Trading Properties
Product Description
Snow load is not a single number. It depends on the roof pitch, the exposure, whether snow can slide off, and whether drift will pile against a parapet or a change in height. This cold climate building is designed for a 2.0 kN per square metre ground snow load converted to roof load with the drift cases included, in a frame detailed for minus 40 degrees service temperature. KXD Steel Structure engineers cold region buildings with the local snow map and the actual roof geometry, because the drift at a valley or a parapet can be twice the flat roof value and it is the usual cause of collapse.
Steel selection changes in cold regions. Q355B with a Charpy impact test at minus 20 degrees is specified rather than a standard grade, because brittle fracture at a weld toe in low temperature is a sudden failure rather than a gradual one. Bolted connections are preferred over site welding where the temperature during erection may drop below minus 5 degrees, and we provide a cold weather erection procedure covering preheat, torque values and the prohibition on impact driving. Roof panels are fixed with a concealed fastener system so no screw penetrates the membrane in a freeze thaw cycle.
Roof geometry does most of the work in snow country. A 15 to 20 degree pitch sheds snow before it accumulates to the design depth, and a warm roof with 200 mm insulation limits melting and refreezing at the eaves, which is what creates ice dams. We detail snow guards above every entrance and along walkways so sliding snow does not become a hazard, and we raise the eave above the expected drift height at the leeward wall. Where the roof has a change in level, the lower roof is designed for the drift surcharge and the structural drawings show the drift envelope so a future extension does not invalidate the design.
Key Features- 2.0 kN per square metre snow load: Ground snow converted to roof load with drift cases at parapets and valleys
- Cold rated steel: Q355B with Charpy impact testing at minus 20 degrees for brittle fracture control
- Bolted site connections: Preferred over welding where erection temperatures drop below minus 5 degrees
- 15 to 20 degree pitch: Sheds snow before accumulation and reduces ice dam risk
- Snow guards: Fitted above entrances and walkways to control sliding snow
- Warm roof construction: 200 mm insulation limits melting and refreezing at the eaves
| Parameter | Specification |
|---|---|
| Snow load | 2.0 kN per square metre ground snow, roof load per geometry |
| Drift cases | Leeward wall, valley and parapet drifts included |
| Design temperature | Minus 40 degrees Celsius service |
| Steel grade | Q355B with Charpy impact test at minus 20 degrees |
| Roof pitch | 15 to 20 degrees |
| Roof insulation | 200 mm with warm roof build up |
| Connection type | Bolted, cold weather erection procedure supplied |
| Span and eave | 30 m clear span, 7 m eave height |
| Snow retention | Snow guards above all exits and walkways |
Cold storage facilities, municipal works depots, agricultural equipment storage, winter maintenance salt and grit stores, mining infrastructure and logistics terminals in northern latitudes all need this specification. It also suits alpine tourism infrastructure such as ski rental halls and service buildings where the roof must remain clear of snow above public entrances. Where the client operates a fleet, the door head height and drift clearance are set around the largest vehicle in the fleet rather than a nominal figure.
Engineering Notes and Quality ControlCold region structures are verified against the snow map, not against experience. We issue the snow load calculation with drift cases shown explicitly and have it reviewed by the client's engineer. Steel mill certificates with impact test results are supplied for every heat number. Weld procedure qualification for the ambient temperature at erection is included, and bolts are checked for the correct property class because a substituted bolt in a cold region is a fracture risk. Roof pitch and drainage are checked after erection with a level before the panels are finally torqued.
Packaging, Loading and WarrantyBundles are protected against moisture during winter transport and stored off the ground on site with drainage gaps. Panels ship with edge protection and are marked by roof zone so drift areas are not confused. Documentation includes the snow load report, mill certificates, cold weather erection procedure and the snow guard layout. Structural warranty is 10 years with a 15 year coating warranty. Send your site location, ground snow data and roof plan for a load check and frame sizing.
Contact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.