Loading Dock Logistics Steel Warehouse Building 12 Dock Levellers 40m Column Free Storage
Product Summary
Throughput in a distribution warehouse is decided at the dock face, not in the racking. Twelve dock positions on a 40 m column free floor means a trailer can be spotted, loaded and released without a forklift crossing another aisle. This logistics warehouse is detailed around that traffic loop: 1.3 ...
Product Custom Attributes
loading dock steel warehouse
,dock leveller warehouse building
,column free logistics shed
Basic Properties
Trading Properties
Product Description
Throughput in a distribution warehouse is decided at the dock face, not in the racking. Twelve dock positions on a 40 m column free floor means a trailer can be spotted, loaded and released without a forklift crossing another aisle. This logistics warehouse is detailed around that traffic loop: 1.3 m dock height, 3.5 m wide by 3.2 m high door openings on a 3.5 m dock pitch, and a 12 m deep staging apron under cover so goods are never loaded in rain. KXD Steel Structure coordinates the dock equipment interfaces with the frame, because a leveller pit cast in the wrong position is a demolition job, not an adjustment.
The dock wall carries more concentrated load than any other elevation. Each leveller pit is surrounded by a reinforced concrete collar tied into the slab, and the steel frame is set back so the wall does not carry vehicle impact. Bumpers are specified as 200 mm thick laminated rubber with a steel face plate, mounted so the trailer underride bar contacts the bumper before the panel. Door openings are framed with a galvanised portal, and the head detail includes a drip edge and a hood so water runs outside the wall line rather than onto the staging floor. Where the client needs drive through access for rigid trucks, we raise the door head and remove the intermediate column at that bay.
Yard geometry decides how many movements per hour are achievable. A 35 m turning circle and a 4 m wide one way loop keeps a shunt truck out of the loading lane, and the dock apron falls away from the building at 2 percent so rainwater does not pool at the leveller. Inside, the 40 m clear span allows three racking rows at 12 m aisle width with a 6 m staging strip along the dock face. Column free space also lets the client re configure racking when the product mix changes, which is the main reason logistics operators accept the slightly heavier frame cost.
Key Features- Twelve dock positions: 3.5 m pitch with framed openings and integrated leveller pits
- 40 m column free floor: Three racking rows and free staging without obstructive columns
- Covered staging apron: 12 m deep canopy keeps goods dry during loading in wet weather
- Impact separated dock wall: Reinforced pit collars and rubber bumpers protect panels from trailer contact
- Graded apron drainage: 2 percent fall away from the building prevents pooling at levellers
- Drive through bay option: Raised door heads and removed columns for rigid truck access
| Parameter | Specification |
|---|---|
| Dock positions | 12 standard, 4 to 24 on request |
| Dock pitch and height | 3.5 m pitch, 1.3 m dock height |
| Door opening | 3.5 m wide by 3.2 m high, galvanised framed |
| Clear span | 40 m column free, 9 m eave height |
| Staging apron | 12 m deep canopy over the dock face |
| Bumpers | 200 mm laminated rubber with steel face plate |
| Apron fall | 2 percent away from building line |
| Structure | Q355B portal frame, hot dip galvanized purlins |
| Design loads | Wind 0.6 kN/m2, roof live 0.5 kN/m2, canopy snow included |
Third party logistics operators, retail distribution centres, e commerce fulfilment sites and export consolidators use this configuration when trailer turnaround time is the KPI. It suits high SKU count operations that need a wide staging strip rather than deep bulk storage, and it also works for manufacturers shipping palletised finished goods on a fixed daily cut off. Where volumes grow, the dock wall can be extended by adding bays to the gable end without altering the traffic loop.
Engineering Notes and Quality ControlDock equipment tolerances are the risk. Leveller pit dimensions are verified against the equipment supplier's drawing before the slab is poured, and we issue a setting out sheet with pit centre lines referenced to the column grid. Panels around the openings are checked for square and plumb within 3 mm. Canopy connections are load tested for wind uplift at the outer edge, and drainage falls are tested with a hose run. Handover includes a dock numbering plan so the client's warehouse team can map door assignments on day one.
Packaging, Loading and WarrantyDock framing, canopy members and bumpers ship in labelled crates by dock number, panels in edge racks, and leveller pits are supplied as steel templates for the concrete contractor. Erection drawings include the dock wall sequence so the frame is stable before the canopy is added. Structural warranty is 10 years, finish warranty 2 years. Send your trailer mix, dock count and yard plan and our team will return a traffic layout with door schedule and frame reactions.
Contact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.